Power and safety are standard
To secure the door from falling, the SA openers provide an integrated and maintenance-free safety catch device. It works independently of the position and speed. This means the motor can be installed in any position. The safety catch device also works independently of the speed. In the event of a problem, the SA series has an emergency hand crank for emergency operation. The door can optionally be conveniently operated using the emergency hand chain. Sectional doors without springs reduce the maintenance costs even with a higher number of cycles since there are no suspension springs to be serviced or replaced. Plug-in connectors mean fast installation for the SA series.
Mains voltage 400 V version
Door openers 400 V, 3-phase: Silent, smooth, resilient. In a word: strong as a bear. These 3-phase 400 V motors are the right solution for large, heavy doors.
External CS 310 comfort control unit
The CS 310 is our external comfort control unit, which leaves nothing to be desired. It offers four output relays for additional functions. Use this, for example, for signal lamps, traffic lights, electrical door locking or the end position alarm. Other elements can be supplied with 24 V or 230 V power. Accessories are connected directly to the control unit. Multi-Bit radio is possible with the CS 310, and the slot for the standard antenna is already included.
Expand as needed: The control unit can be expanded through MS-Bus modules, for example, for oncoming traffic regulation or draw-in protection.
Even more safety: Safety equipment, such as photocells or a closing edge safety device can be connected via terminals.
Easy and comfortable: Easy, plug-in cable sets ensure comfortable installation.
Length of use 60 %
60 % duty cycle: Normal duty cycle for 400 V openers. Designed for doors with average opening frequency. This corresponds to a maximum of 20 door cycles per hour. One cycle corresponds to opening and closing the door one single time.
Emergency operation of doors and roller shutters without springs
KE (emergency hand chain): The emergency hand chain can optionally be ordered for doors and roller shutters without springs. It allows convenient operation of doors from the ground in a power outage.
KU (emergency hand crank): The emergency hand crank is the standard emergency operation facility for doors and roller shutters without springs. The crank saves space by being attached directly to the opener. Openers can be retrofitted from crank to chain for emergency operation if desired.
Integrated safety catch device
The safety catch device means additional safety. In an emergency, it prevents the door from falling. It is maintenance-free and is independent of the position and speed. In a word, this means: No matter which position the motor is mounted in, the safety catch device can be depended on to work. This is true irrespective of the output speed, as our safety catch device is compatible.
Our range of accessories for enhanced safety and comfort.
Click here to find accessories for your opener - select just what you need for your requirements and wishes.
Click here for more information about your opener