Do you have a roller shutter that is outfitted with a sprocket drive? If so, you require an external safety catch to secure the door curtain against falling. Similarly, roller shutters with a tubular motor that is installed on the inside of the winding shaft also require fall protection.
As an experienced manufacturer of roller shutter drives, Marantec offers you two series – TS and F: With the high-quality TS series, the safety catch can be reset and reused after a fall . Our F series, on the other hand, is a single-use safety catch that will need to be replaced after a fall.
TS safety catch
F Safety catch
All safety catches are generally equipped with an electrical safety switch. This switch is connected to the emergency stop system of the door control. In the event of a fall, the safety catch prevents the door curtain from falling , and via the safety switch, the door control unit halts the drive motor. For all safety catches, the maximum operating speed must never be exceeded during normal operation. All safety catches are equipped with an integrated damping with pendulum foot mounting. Naturally, the certificates from a test center recognized throughout Europe are available for both series.
Operating manuals for our drive systems and products on safety instructions, installation, commissioning, operation, and maintenance can be found in our search for installation manuals.