Go to Installation Instructions

STAC 1 series with integrated control unit

Convenience and safety go hand in hand with the STAC 1 series. The integrated CS 255 AC controller is an expandable dead man's controller. Safety features such as a light barrier or a closing edge safety device can easily be connected using the provided terminals, thereby allowing the controller to be self-holding. Operation takes place via an external pushbutton. If desired, it is also possible to program basic functions with the CS-I 15 pushbutton. Furthermore, it is also possible to expand this component with our convenient and secure bi·linked wireless accessories. For this purpose, the controller can be retrofitted with our standard antenna. All functions can be optionally programmed via the plug-in programming display with plain text display using an MS bus cable.

Features

  • Standard hollow shaft 25.4 mm
  • 400 V, 3-phase (STAC 1) or 230 V, 1-phase (STAWC 1)
  • Integrated control unit CS 255 AC, extendable using MS bus modules
  • 20 (STAC 1) or 8 (STAWC 1) opening cycles per hour
  • KE (emergency hand chain) or E/KE (emergency hand chain with maintenance release)
  • Digital limit switch


About the features and functions

Download Dokumente

Commercial door drive brochure

PDF – 14.0 MB
Language: English

Download technical data

PDF – 255.9 KB
Language: English

Misplaced the installation instructions?

Operating instructions for our drive systems and products on safety information, assembly, commissioning, operation and maintenance can be found in our search for installation instructions.

Go to installation instructions