Be it in the pharmaceutical industry, in oil and gas processing or in the food industry: Many companies have explosion hazard areas, where gases, vapors or dusts can form an explosive mixture in combination with air. To prevent such a mixture from igniting, there must not be any flying sparks from electrical equipment . Accordingly, these areas must comply with certain safety guidelines , also when it comes to choosing a suitable door opener or control system.
And this is where our ATEX openers and ATEX control units come in!
The term ATEX is derived from the French expression “Atmosphères explosibles” and refers to the European directives for explosion hazard areas. In order to protect persons in such areas, there exist regulations for placing electrical and mechanical equipment on the market and operating them, as well as monitoring and control devices.
Roller shutter drive MDF 30-40-15
Roller shutter drive MDF 50-75-10
Sectional door drive STA 1-11-24
For gas and dust processing, we offer solutions for gas (Zone 1 and Zone 2) and dust (Zone 21 and 22). All drive and control components meet the requirements arising from use in explosion-protected areas and thus ensure safe operation. This also includes not using emergency hand chains. Emergency operation is therefore only possible using a crank. As protection against overload and short-circuits, the motor protection switch prevents the housing surface from overheating.
Key features at a glance
For ATEX applications, we recommend our tried-and-tested CS320 comfortable control unit. It is available in two variants: for automatic operation or dead man’s operation.
Our automatic variant is available with three power levels:
In addition to the CS320 PCB with LC display, you will receive:
In addition to the CS320 PCB with LC display, this variant includes:
This ensures safe operation with dead man’s function for roller shutters and sectional doors. The connection of a closing edge safety device and light barrier or retrofitting to create an automatic variant is not possible.
Want to know more about the CS 320?
The CS 320 is our external control unit for complex requirements and is suitable for controlling roller shutters, sectional, or PVC high-speed doors.To the industrial door control units
Do you like obtaining everything from a single source? If so, in addition to our ATEX drives and control units, you can also order additional accessories from Marantec:
Do you have any other questions about our drives and control units for explosion-protected areas? We would be happy to advise you on your situation on site. Please get in touch with us!
Operating manuals for our drive systems and products on safety instructions, installation, commissioning, operation, and maintenance can be found in our search for installation manuals.