| Command devices |
|
| Control 400/401 |
|
| are induction loop detectors. When the buried induction loop is crossed, an impulse is sent to the operator system. The Control 401 also has a “direction recognition” function. |
| |
|
| Command 802 |
|
| The transponder electronic reading device can be set up for a maximum of 30 users. Using code cards or keyrings, an impulse is sent to the operator and thus allows contact-free operation. A separate adapter for the power supply is required. |
| |
|
| Command 312 |
|
| is a Marantec key-operated button in an elegant key switch post. The impulse for opening and closing the door is sent via one-sided or two-sided contacts. |
| |
|
| Command 311 |
|
| is a recessed-mounted key switch (with an aluminium panel) for controlling the operator using a key. The switch can also be surface-mounted. |
| |
|
| Command 231 |
|
| is a remote digital coder. By entering a 4 digit PIN code, an impulse signal is given for opening or closing. In addition, 1 channel can be programmed with another PIN code, e.g., for short-term access. Another channel can be programmed for external lighting. For use with the corresponding Marantec digital receiver. |
| |
|
| Command 201/202 |
|
| are 1-channel code buttons. By entering an individual PIN code, an impulse for opening or closing the door is sent. The power supply and data exchange proceed via a system cable (Command 201) or using conventional cabling (Command 202). Another function: light for external lighting. |
| |
|
| Coin checker |
|
| uses coins to control entries and exits. |
| |
|
| Remote Controls |
|
| Digital hand transmitters |
|
| Marantec hand transmitters provide wireless door control. They work on base of the Marantec multibit technology. With more than 281 trillion coding possibilities, each transmitter is certainly one-of-a-kind. Marantec hand transmitters come as 1, 2, 3 and 4 channel transmitters, with wall and sun visor clips or a keyring. The 1 and 3 channel transmitter is available with a protective sliding cover. These transmitters can be used to control additional doors or external lighting. All hand transmitters are Homelink compatible and work on 433 and 868 MHz frequencies. Using the code-learning function, other transmitters can be easily coded at any time. Marantec hand transmitters are superbly designed with ergonomically formed keys preventing operating errors. |
| |
|
| Digital 178 |
|
| receives the signals of the hand transmitter and transmits these to the control unit. Through the connection of the external magnet stand aerial the range is improved. Digital 178 is available in frequencies 433 and 868 MHz. |
| |
|
| Safety Technology |
|
| Special 632 |
|
| This innovative and proven photocell can also be used for the new Parc 200. Besides offering optimum protection for people, vehicles and door and gate systems, its outstanding feature is its tool-free assembly. The photocell is also ideally protected, being incorporated in the barrier arm housing. The Special 632 reliably indicates the functional state as well as any build-up of contamination. |
| |
|
| Special Accessories |
|
| Park barrier arm |
|
| is available in the length from 3-6 m. |
| |
|
| LED lights |
|
| The new Parc 200 park barrier arms incorporate an LED light feature to enhance visibility at any time. Lights flash when the barrier arm is in motion and change to a continuous light when the barrier arm is fully open or close. |
| |
|
| Fork pillar |
|
| used as a tip support for the barrier arm and is securely anchored to the ground. |
| |
|
| Aluminium post |
|
| is used for the installation of the photocell. |
| |
|
