| Remote Controls |
|
| Radio code keypad Command 222 |
|
| Control and operate from outside with a 4-digit PIN code, weatherproof, vandal-resistant, with illuminated keys. |
| |
|
| Digital hand transmitter Digital |
|
| Available with 1 to 4 buttons for different functions. For the handbag or pocket, for the sun visor or for the wall. |
| |
|
| Antenna Digital 178, 179 |
|
| The antenna receives the signals of the hand transmitter and transmits these to the control unit. Through the connection of the external magnet stand aerial the range is improved. |
| |
|
| Command devices |
|
| Transponder systems Command 802, 812 |
|
| The system for all cases. Electronic reading device through code cards in credit card format or keyrings, for max. 30 or 2,000 users, ease of use. |
| |
|
| Induction loop detector Command 403 |
|
| When the buried induction loop is crossed, an impulse is sent to the operator system. Special advantages of the new loop detector are the integrated measurement and integrated LC display for simple programming and simulation. |
| |
|
| Coin checking device |
|
| Safe entry and exit control by the coin checking device pre-assembled in the aluminum post. Additional operating and safety elements can be integrated. |
| |
|
| Transponder code card |
|
| Touch-free operation in credit card format. Only in connection with transponder electronic reading device Command 802, 812. |
| |
|
| Transponder keyrings |
|
| Easy, fast and always at hand. For touch-free operation of the parking barrier, only in connection with transponder electronic reading device Command 802, 812. |
| |
|
| Safety Technology |
|
| Signal light Control 950 |
|
| For optimum attention. If the barrier arm is in motion, it blinks or is illuminated with energy-efficient LED technology. As with all safety components, the Control 950 is also a Marantec development, providing a perfect expansion. |
| |
|
| LED illumination |
|
| The barrier arms can be illuminated at any time for improved visibility via LEDs. Lights flash when barrier arm is in motion and change to a continuous light when barrier arm is fully open or close. |
| |
|
| Special 632 |
|
| Protected and tool-free assembly of the one-way photocell. Assembly is fast and easy thanks to tool-free locking, optionally in the park barrier housing or a aluminum column. |
| |
|
| Special Accessories |
|
| Park barrier arm |
|
| Park barrier arms are available in the length from 3 up to 6 m. With Oval arm profile, depending on system: Parc 200: 77 x 48 mm, Parc 300: 95 x 52 mm. |
| |
|
| Pendulum support |
|
| By using the pendulum support, the barrier arm is stabilized and supported quietly and softly. |
| |
|
| Support posts |
|
| Serve as a support to the barrier arm and is fi rmly anchored into the ground. Required from a barrier arm length of 4 m. |
| |
|
| Height-adjustable fork support posts in stainless steel design |
|
| Height-adjustable stainless steel fork support posts are recommended to provide safe support in a horizontal position, as well as for boom lengths of less than 4 m. Continously height adjustable from 725 mm up to 1025 mm. |
| |
|
| Magnetic lock |
|
| A magnet is used as additional protection against vandalism. The magnet holds the boom in the closed position and prevents undesired forceful opening. Application only in combination with stainless steel fork. |
| |
|
| Body in stainless steel design |
|
| In addition to the standard steel body, a stainless steel version is available for special applications. |
| |
|
| Aluminium post |
|
| It is used for the installation of the photocell. |
| |
|
| Expansion module EM 191 synchronous operation |
|
| Perfect synchronization for optimum comfort. Previously existing operation and safety elements can be used for both parking barriers. |
| |
|
